According to the Environmental Protection Agency (EPA), “There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control humidity. Even if you clean the mold, it will return if the room is damp and poorly ventilated or if there is one. As long as you only cover a small area, mold on walls is generally easy to remove yourself. You can use several household products.
Popular and effective options include borax, vinegar, baking soda, tea tree oil, bleach, and hydrogen peroxide. To remove mold from the basement, scrub walls with a large brush and keep in mind that porous surfaces, such as ceiling tiles or drywall, may need to be removed and replaced. Rinse the coating first, spray on a non-toxic mold remover, let it sit while the mold begins to dissolve, and then rinse it off. In general, clean surfaces to remove condensation and erase stagnant water to prevent mold from growing.
This means mold can grow almost anywhere, so being alert and addressing it early can minimize the damage mold can cause to your home and your health. If that still doesn't work, you can use a specially formulated mold remover and mix it with your bleach solution. Black mold (stachybotrys) is the variety most people fear, but even black mold can be easily removed if detected early enough. But what if it's a large area of mold growth? Or maybe, natural mold removers don't get rid of mold enough? In this case, you may want to use a more robust chemical cleaner.
Gutter maintenance can help prevent water damage and prevent mold and other pests from settling in your home. Clogged gutters may cause your roof to leak and for sure that once it gets wet this will promote the of molds to begin. Either by yourself, if you have enough equipment and experience but if not then it's much better to hire a professional gutter cleaning service like Gutter Cleaning Kennesaw GA to avoid any further damage.
Treat exposed walls, floors, and woods with an aerosol to quickly and effectively remove mold, and install a fan or dehumidifier to dry the attic once the treatment is complete. This is true whether mold or spores are alive or dead, which is why the EPA generally does not recommend the use of chlorine bleach or other biocides as part of mold cleaning. If the carpet in the basement has become moldy, wipe it (with a mask on) to loosen the mold and let it dry in the sun if you can move it, or use high-powered fans to remove moisture if it's stuck to the floor. Spray the affected area with the solution and use a scouring pad or brush to remove mold.
The air that enters the HVAC system from outside passes through the scrubber and that removes harmful particles, such as mold spores. In addition to making this a much more complicated job, removing contaminated material also greatly increases the risk of removing mold. Basement mold can be persistent, given the nature of basements: they tend to be much more humid than levels above ground and generally have poor ventilation and poor air flow, a combination that can cause mold to flourish. Removing mold in the home is different on a case-by-case basis, but you should know that you can do it yourself or have an expert come in.
Leave a Comment